Firestik K-4A Antenna Mount Stud
-
Order by 2pm EST for same day shipping
-
Call 603-224-7370 to reach a parts specialist
-
No Sales Tax in NH
Firestik K-4A Antenna Mount Stud
The importance of the stud mount cannot be over stressed! The antenna stud mount acts as a bridge between the antenna and the coaxial feedline. Accordingly, it needs to allow for efficient transfer of your transmitted and received signals to and from the transceiver. If the stud mount doesn't perform that task efficiently you end up with unneeded loss. And if that isn't enough, the stud mount must be strong enough to withstand all of the stress placed upon it from an antenna that is subject to severe wind load and vibration.
Firestik stud mounts have become the standard of our industry. This wasn't by accident. It was because users learned to appreciate their outstanding design and material quality. Instead of inexpensive aluminum, we use chrome plated machine brass. Instead of 9/16" (14mm) hex-stock, we use 5/8" (16mm) stock. Instead of ABS or inferior plastic insulators, we use nylon. Instead of cadium plated hardware, we use stainless steel. Furthermore, our heavy-duty 3/8" center shanks can mean the difference between trouble free use and lost antennas.
Our model K-4A stud mount has been praised by communications professionals for 20 years. You can actually pay more for a stud mount but you certainly will not get more than what the K-4A offers. The K-4A should be used whenever a PL-259 terminated coax cable is to be used (K-8A, K-9A, R-8A, R-9A). Like the K-4, this stud is designed for 1/2" (13mm) holes. In a typical installation, antennas with 0.680" (15mm) of exposed threads can be used without the fear of bottoming out before proper tightening is accomplished.
K-4A
Still looking for the perfect part? Having trouble finding it?
Call our product experts at 603-224-7370 and let us lend a hand.
Firestik K-4A Antenna Mount Stud
The importance of the stud mount cannot be over stressed! The antenna stud mount acts as a bridge between the antenna and the coaxial feedline. Accordingly, it needs to allow for efficient transfer of your transmitted and received signals to and from the transceiver. If the stud mount doesn't perform that task efficiently you end up with unneeded loss. And if that isn't enough, the stud mount must be strong enough to withstand all of the stress placed upon it from an antenna that is subject to severe wind load and vibration.
Firestik stud mounts have become the standard of our industry. This wasn't by accident. It was because users learned to appreciate their outstanding design and material quality. Instead of inexpensive aluminum, we use chrome plated machine brass. Instead of 9/16" (14mm) hex-stock, we use 5/8" (16mm) stock. Instead of ABS or inferior plastic insulators, we use nylon. Instead of cadium plated hardware, we use stainless steel. Furthermore, our heavy-duty 3/8" center shanks can mean the difference between trouble free use and lost antennas.
Our model K-4A stud mount has been praised by communications professionals for 20 years. You can actually pay more for a stud mount but you certainly will not get more than what the K-4A offers. The K-4A should be used whenever a PL-259 terminated coax cable is to be used (K-8A, K-9A, R-8A, R-9A). Like the K-4, this stud is designed for 1/2" (13mm) holes. In a typical installation, antennas with 0.680" (15mm) of exposed threads can be used without the fear of bottoming out before proper tightening is accomplished.
K-4A
Still looking for the perfect part? Having trouble finding it?
Call our product experts at 603-224-7370 and let us lend a hand.
Extras
The following products are meant to be used or paired with the product above.
|
President Electronics - Lincoln 2 - 10 Meter CB Radio |
 |
|
Astatic 636L 4 Pin Noise Canceling Microphone |
|
|
BlueParrott B450-XT Noise Cancelling Head Set |
|
Still looking for the perfect part? Having trouble finding it?
Call our product experts at 603-224-7370 and let us lend a hand.
WE OFFER EXPEDITED SHIPPING UPON REQUEST. CALL FOR FASTER SHIPPING OPTIONS. (603) 224-7370
- eCommerce website orders will be assessed standard UPS shipping charges based on destination, weight and dimensions of product(s) purchased.
-
FREE UPS Shipping on orders of $1000 or more on standard ground shipments inside the continental U.S. (Alaska & Hawaii excluded)
(Does not apply to truck freight shipping) - Oversized, Expedited or Remote Location Shipments: the customer will be charged the cost difference over the standard ground rate.
- 50% off Truck Freight on orders of $1,500 or more*.
- Free shipping cost not to exceed 5% over retail cost of product being shipped.
- 50% OFF limited to 5% of retail cost of product being shipped.
*Phone orders only
WE SHIP TO THE UNITED STATES ONLY, WE HAVE RESTRICTED BROWSING OUR SITE TO COUNTRIES IN NORTH AMERICA ONLY
QUESTIONS AND CONTACT INFORMATION
Berube’s Truck Accessories
Attn: Privacy Compliance Officer
2 Tallwood Drive
Bow, NH 03304
(603) 224-7370
info@berubes.com
Defective Products:
Returns of defective products will receive replacement product in accordance to Manufacturer policy.
Non-Defective Products:
Returns of non-defective products must be in new resalable condition.
- Stainless Steel Items: Stainless steel items must NOT have their protective laser film removed to qualify for a refund under Berube's return policy.
Refund:
- Returns up to 30 days from the date of purchase will be eligible for a 100% refund or store credit.
- Returns 31 - 90 days from the date of purchase will be subject to a 20% restocking fee.
- Returns over 90 days will be at the discretion of Berube’s Truck Accessories and be subject to a 25% or more restocking fee.
- Shipping will not be refunded for returned products (unless shipped defective or incorrectly by fault of Berube’s Truck Accessories).
- Receipt is required for refund.
- Refunds will be in same payment form as purchase (i.e. refunded to credit/debit card used for purchase, if the original card is not available a store credit will be issued, cash for cash, if the purchase was made by check a refund will be issued after 14 days from the date of purchase). Returns without a receipt will only receive a store credit and may be subject to a restocking fee. Return policy is subject to change.
Special Orders:
Cancellation of special orders may be subject to loss of deposit. Returns of special orders are not accepted unless product is defective.
