3/4" Yellow Zinc SAE Flat Washer Thru-Hardened (Grade 8)
KL Jack & Co.

3/4" Yellow Zinc SAE Flat Washer Thru-Hardened (Grade 8)

Code: 9971
$0.75
In Stock
  • Order by 2pm EST for same day shipping

  • Call 603-224-7370 to reach a parts specialist

  • No Sales Tax in NH


 WARNING:
Cancer and Reproductive Harm
www.p65warnings.ca.gov
K.L. Jack & Co.

3/4" Yellow Zinc SAE Flat Washer Thru-Hardened (Grade 8)

SAE thru-hardened steel flat washers are typically used with Grade 8 Bolt and Nut assemblies to increase the load bearing surface area under the head of the bolt or nut while providing a smooth hard surface for the nut to be tightened down onto. They are made to the dimensional requirements of ASME B18.21.1 Type A Narrow Series and meet the material requirements of ASTM F436 for heat treated, quenched and tempered steel round flat washers with a thru-hardness (core) of Rc 38-45. SAE dimension flat washers have a smaller outside diameter and are stamped from thinner gauge steel plate than the equivalent sized commercial USS (U.S.Standard) flat washer. SAE washers are often used under bolt heads and with hex nuts when there is less clearance around the fastener head or a limited bolting surface is available. Washers are finished with a Zinc Yellow Dichromate plating provide protection against normal atmospheric corrosion. Washers are manufacturer stamped for identification and traceability.

Manufacturer KL Jack Quality Vendor
Item Type Flat Washer - SAE
System of Measurement Inch
Diameter 3/4"
Bolt Size 3/4"
Finish Yellow Zinc
Grade Thru-Hardened
Hardness Rockwell C38-45
Inside Diameter 0.812"
Material Steel
Nominal Thickness 0.134"
Outside Diameter 1-15/32"
Specification - ASTM F436
Specification - ASME ASME B18.21.1, Type A, Narrow
Style SAE
Supplier Part Number S0034ZD
Thickness 0.108"-0.160"


75NWSA8Z


Still looking for the perfect part? Having trouble finding it? 
Call our product experts at 603-224-7370 and let us lend a hand.

K.L. Jack & Co.

3/4" Yellow Zinc SAE Flat Washer Thru-Hardened (Grade 8)

SAE thru-hardened steel flat washers are typically used with Grade 8 Bolt and Nut assemblies to increase the load bearing surface area under the head of the bolt or nut while providing a smooth hard surface for the nut to be tightened down onto. They are made to the dimensional requirements of ASME B18.21.1 Type A Narrow Series and meet the material requirements of ASTM F436 for heat treated, quenched and tempered steel round flat washers with a thru-hardness (core) of Rc 38-45. SAE dimension flat washers have a smaller outside diameter and are stamped from thinner gauge steel plate than the equivalent sized commercial USS (U.S.Standard) flat washer. SAE washers are often used under bolt heads and with hex nuts when there is less clearance around the fastener head or a limited bolting surface is available. Washers are finished with a Zinc Yellow Dichromate plating provide protection against normal atmospheric corrosion. Washers are manufacturer stamped for identification and traceability.

Manufacturer KL Jack Quality Vendor
Item Type Flat Washer - SAE
System of Measurement Inch
Diameter 3/4"
Bolt Size 3/4"
Finish Yellow Zinc
Grade Thru-Hardened
Hardness Rockwell C38-45
Inside Diameter 0.812"
Material Steel
Nominal Thickness 0.134"
Outside Diameter 1-15/32"
Specification - ASTM F436
Specification - ASME ASME B18.21.1, Type A, Narrow
Style SAE
Supplier Part Number S0034ZD
Thickness 0.108"-0.160"


75NWSA8Z


Still looking for the perfect part? Having trouble finding it? 
Call our product experts at 603-224-7370 and let us lend a hand.

Extras

The following products are meant to be used or paired with the product above.

  Stainless Steel U-Bolt Kit (4 mounts) Stainless Steel U-Bolt Kit (4 mounts) Shop Now
4 or 6 Point Deck Plate Mounting Kit 4 or 6 Point Deck Plate Mounting Kit Shop Now
Life-Time Galvanized 4 Tube Kit Life-Time Galvanized 4 Tube Kit Shop Now


Still looking for the perfect part? Having trouble finding it? 
Call our product experts at 603-224-7370 and let us lend a hand.

WE OFFER EXPEDITED SHIPPING UPON REQUEST.   CALL FOR FASTER SHIPPING OPTIONS.   (603) 224-7370


  • eCommerce website orders will be assessed standard UPS shipping charges based on destination, weight and dimensions of product(s) purchased.
  • FREE UPS Shipping on orders of $1000 or more on standard ground shipments. (Does not apply to truck freight shipping)
  • Oversized, Expedited or Remote Location Shipments: the customer will be charged the cost difference over the standard ground rate.
  • 50% off Truck Freight on orders of $1,500 or more*.
  • Free shipping cost not to exceed 5% over retail cost of product being shipped.
  • 50% OFF limited to 5% of retail cost of product being shipped.

*Phone orders only


QUESTIONS AND CONTACT INFORMATION

Berube’s Truck Accessories
Attn: Privacy Compliance Officer
2 Tallwood Drive
Bow, NH 03304
(603) 224-7370
info@berubes.com

Defective Products:
Returns of defective products will receive replacement product in accordance to Manufacturer policy.

Non-Defective Products:
Returns of non-defective products must be in new resalable condition.

Refund:

  • Returns up to 30 days from the date of purchase will be eligible for a 100% refund or store credit.
  • Returns 31 - 90 days from the date of purchase will be subject to a 20% restocking fee.
  • Returns over 90 days will be at the discretion of Berube’s Truck Accessories and be subject to a  25% or more restocking fee.
  • Shipping will not be refunded for returned products (unless shipped defective or incorrectly by fault of Berube’s Truck Accessories).
  • Receipt is required for refund.
  • Refunds will be in same payment form as purchase (i.e. refunded to credit/debit card used for purchase, if the original card is not available a store credit will be issued, cash for cash, if the purchase was made by check a refund will be issued after 14 days from the date of purchase). Returns without a receipt will only receive a store credit and may be subject to a restocking fee. Return policy is subject to change.


Special Orders:
Cancelation of special orders may be subject to loss of deposit. Returns of special orders are not accepted unless product is defective.