Firestik II "FS" Series Antenna
FireStik

Firestik II "FS" Series Antenna

Code: 1206
$21.95
In Stock
  • Order by 2pm EST for same day shipping

  • Call 603-224-7370 to reach a parts specialist

  • No Sales Tax in NH

FireStik Antenna Company

The FireStik II "FS" antennas are 100% American made with 100% American materials. To maintain a balance between flexibility and ruggedness, we use a custom blended, glass fiber reinforced shaft. Each is wound with heavy insulated copper wire to prevent the oxidation and shorted windings often found on non-Firestik antennas.

The tunable tip mechanism is made from rust-proof brass and has a rubber o-ring to hold the adjuster in place after tuning. Our 3/8"-24 threaded base has a tapered contact point that works especially well with Firestik mounts and accessories.

Made in USA

The tapered "lug-nut" effect transfers stress away from the threads and reduces the possibility of vibration induced loosening of the antenna in its mount. Each antenna is covered with a static reducing, water-tight sleeve containing UV and pigment stabilizers. For peek performance we recommend that you use one of our 18-foot Fire-Flex coaxial cables with these antennas.

ALL antennas, regardless of style or manufacturer, MUST be tuned after installation on the vehicle. Transmitting antennas are not "plug-n-play" devices.

  • Wattages - 300W, 600W, 900W, or 1000W
  • Works with all CB radios - Cars, trucks, RV's motorcycles, vans, semi's, and more...
  • Average tuned SWR - 1.5:1
  • Works on either single or dual antenna configurations
  • Standard 3/8 thread
  • All mode operation: AM/FM/SSB and NOAA Alert
  • Tunable Tip - Tune by hand, no tools needed!
  • Static reduction cap, eliminates up to 50% of noise
  • Recommend 18ft coax cable
  • 5 Year Manufacturer Warranty
  • 5/8 Wave Antenna
  • Top Loaded Design

Don’t see it here?
No problem, give us a call at 603-224-7370 and one of our expert parts people will get all the details and make sure you & your truck are covered.


FS2B, FS2-BL, FS2R, FS2W, FS3B, FS3-BL, FS3R, FS3W, FS4B, FS4R, FS4W, FS5B
FireStik Antenna Company

The FireStik II "FS" antennas are 100% American made with 100% American materials. To maintain a balance between flexibility and ruggedness, we use a custom blended, glass fiber reinforced shaft. Each is wound with heavy insulated copper wire to prevent the oxidation and shorted windings often found on non-Firestik antennas.

The tunable tip mechanism is made from rust-proof brass and has a rubber o-ring to hold the adjuster in place after tuning. Our 3/8"-24 threaded base has a tapered contact point that works especially well with Firestik mounts and accessories.

Made in USA

The tapered "lug-nut" effect transfers stress away from the threads and reduces the possibility of vibration induced loosening of the antenna in its mount. Each antenna is covered with a static reducing, water-tight sleeve containing UV and pigment stabilizers. For peek performance we recommend that you use one of our 18-foot Fire-Flex coaxial cables with these antennas.

ALL antennas, regardless of style or manufacturer, MUST be tuned after installation on the vehicle. Transmitting antennas are not "plug-n-play" devices.

  • Wattages - 300W, 600W, 900W, or 1000W
  • Works with all CB radios - Cars, trucks, RV's motorcycles, vans, semi's, and more...
  • Average tuned SWR - 1.5:1
  • Works on either single or dual antenna configurations
  • Standard 3/8 thread
  • All mode operation: AM/FM/SSB and NOAA Alert
  • Tunable Tip - Tune by hand, no tools needed!
  • Static reduction cap, eliminates up to 50% of noise
  • Recommend 18ft coax cable
  • 5 Year Manufacturer Warranty
  • 5/8 Wave Antenna
  • Top Loaded Design

Don’t see it here?
No problem, give us a call at 603-224-7370 and one of our expert parts people will get all the details and make sure you & your truck are covered.


FS2B, FS2-BL, FS2R, FS2W, FS3B, FS3-BL, FS3R, FS3W, FS4B, FS4R, FS4W, FS5B
  • eCommerce website orders will be assessed standard UPS shipping charges based on destination, weight and dimensions of product(s) purchased.
  • FREE UPS Shipping on orders of $500 or more on standard ground shipments.
  • Oversized, Expedited or Remote Location Shipments: the customer will be charged the cost difference over the standard ground rate.
  • 50% off Truck Freight on orders of $1,500 or more*.
  • Free shipping cost not to exceed 5% over retail cost of product being shipped.
  • 50% OFF limited to 5% of retail cost of product being shipped.

*Phone orders only


QUESTIONS AND CONTACT INFORMATION

Berube’s Truck Accessories
Attn: Privacy Compliance Officer
2 Tallwood Drive
Bow, NH 03304
(603) 224-7370
info@berubes.com

Defective Products:
Returns of defective products will receive replacement product in accordance to Manufacturer policy.

Non-Defective Products:
Returns of non-defective products must be in new resalable condition.

Refund:

  • Returns up to 30 days from the date of purchase will be eligible for a 100% refund or store credit.
  • Returns 31 - 90 days from the date of purchase will be subject to a 20% restocking fee.
  • Returns over 90 days will be at the discretion of Berube’s Truck Accessories and be subject to a  25% or more restocking fee.
  • Shipping will not be refunded for returned products (unless shipped defective or incorrectly by fault of Berube’s Truck Accessories).
  • Receipt is required for refund.
  • Refunds will be in same payment form as purchase (i.e. refunded to credit/debit card used for purchase, if the original card is not available a store credit will be issued, cash for cash, if the purchase was made by check a refund will be issued after 14 days from the date of purchase). Returns without a receipt will only receive a store credit and may be subject to a restocking fee. Return policy is subject to change.


Special Orders:
Cancelation of special orders may be subject to loss of deposit. Returns of special orders are not accepted unless product is defective.