#10 x 3/4" Stainless Steel Phillips Pan Head Tek Screw 410
KL Jack & Co.

#10 x 3/4" Stainless Steel Phillips Pan Head Tek Screw 410

Code: 5681~EACH
$0.40
In Stock
  • Order by 2pm EST for same day shipping

  • Call 603-224-7370 to reach a parts specialist

  • No Sales Tax in NH


 WARNING:
Cancer and Reproductive Harm
www.p65warnings.ca.gov
K.L. Jack & Co.

#10 x 3/4" Stainless Steel Phillips Pan Head Tek Screw 410

Self-drilling screws, often called Tek screws, save you time and effort by drilling their own holes and fastening in a single operation. They feature a notched tip that drills it’s own hole in metal and then forms or taps mating threads. Designed for speed and convenience, a properly specified self-drilling screw requires only a Screwgun for installation, eliminating the need for a pilot bit or a pre-drilled hole. Self-drilling screws are available in different head styles and materials and can be used for a variety of different applications such as fastening Metal to Metal or Wood to Metal. Teks will not fasten securely into wood so are best specified for applications where metal is the base layer of a fastened assembly. In this scenario a Tek, (self-drilling) screw works very well for securing wood, steel siding, rigid insulation and other construction materials to a suitable metal backing. Pan Head Teks are manufactured of case-hardened steel with a Clear Zinc Chromate plating to provide protection against normal atmospheric corrosion. They are also available in 400 series stainless steel for use in wetter or more severe environments when corrosion is a concern.

When selecting a self-drilling screw it is critical to match the screws drill capacity range, (Cut Depth), to the thickness of the metal being fastened. Tek screws can drill no deeper into metal than the length of the pilot tip on the screw. As a general rule, after installation a minimum of three screw threads should protrude past the back side of the supporting/fastened metal. Please see the Technical Specs section of this web page for specific cut depth capacity information. Successful installation of these self-drilling screws requires using a screw gun with a 0-2500 rpm range.

Item Type Pan Head Self-Drilling Screw
System of Measurement Inch
Drive Type Phillips
Diameter #10
Diameter (Decimal) 0.1900"
Length (inches) 3/4"
Cut Depth 0.036"-0.175"
Drive Size #2
Grade 410
Head Style Pan
Material Stainless Steel
Point Type #3
Supplier Part Number

4-PXD-10-75


10D75UXP4


Still looking for the perfect part? Having trouble finding it? 
Call our product experts at 603-224-7370 and let us lend a hand.

K.L. Jack & Co.

#10 x 3/4" Stainless Steel Phillips Pan Head Tek Screw 410

Self-drilling screws, often called Tek screws, save you time and effort by drilling their own holes and fastening in a single operation. They feature a notched tip that drills it’s own hole in metal and then forms or taps mating threads. Designed for speed and convenience, a properly specified self-drilling screw requires only a Screwgun for installation, eliminating the need for a pilot bit or a pre-drilled hole. Self-drilling screws are available in different head styles and materials and can be used for a variety of different applications such as fastening Metal to Metal or Wood to Metal. Teks will not fasten securely into wood so are best specified for applications where metal is the base layer of a fastened assembly. In this scenario a Tek, (self-drilling) screw works very well for securing wood, steel siding, rigid insulation and other construction materials to a suitable metal backing. Pan Head Teks are manufactured of case-hardened steel with a Clear Zinc Chromate plating to provide protection against normal atmospheric corrosion. They are also available in 400 series stainless steel for use in wetter or more severe environments when corrosion is a concern.

When selecting a self-drilling screw it is critical to match the screws drill capacity range, (Cut Depth), to the thickness of the metal being fastened. Tek screws can drill no deeper into metal than the length of the pilot tip on the screw. As a general rule, after installation a minimum of three screw threads should protrude past the back side of the supporting/fastened metal. Please see the Technical Specs section of this web page for specific cut depth capacity information. Successful installation of these self-drilling screws requires using a screw gun with a 0-2500 rpm range.

Item Type Pan Head Self-Drilling Screw
System of Measurement Inch
Drive Type Phillips
Diameter #10
Diameter (Decimal) 0.1900"
Length (inches) 3/4"
Cut Depth 0.036"-0.175"
Drive Size #2
Grade 410
Head Style Pan
Material Stainless Steel
Point Type #3
Supplier Part Number

4-PXD-10-75


10D75UXP4


Still looking for the perfect part? Having trouble finding it? 
Call our product experts at 603-224-7370 and let us lend a hand.


WE OFFER EXPEDITED SHIPPING UPON REQUEST.   CALL FOR FASTER SHIPPING OPTIONS.   (603) 224-7370


  • eCommerce website orders will be assessed standard UPS shipping charges based on destination, weight and dimensions of product(s) purchased.
  • FREE UPS Shipping on orders of $1000 or more on standard ground shipments inside the continental U.S. (Alaska & Hawaii excluded)
         (Does not apply to truck freight shipping)
  • Oversized, Expedited or Remote Location Shipments: the customer will be charged the cost difference over the standard ground rate.
  • 50% off Truck Freight on orders of $1,500 or more*.
  • Free shipping cost not to exceed 5% over retail cost of product being shipped.
  • 50% OFF limited to 5% of retail cost of product being shipped.

*Phone orders only

WE SHIP TO THE UNITED STATES ONLY, WE HAVE RESTRICTED BROWSING OUR SITE TO COUNTRIES IN NORTH AMERICA ONLY


QUESTIONS AND CONTACT INFORMATION

Berube’s Truck Accessories
Attn: Privacy Compliance Officer
2 Tallwood Drive
Bow, NH 03304
(603) 224-7370
info@berubes.com


Defective Products:
Returns of defective products will receive replacement product in accordance to Manufacturer policy.

Non-Defective Products:
Returns of non-defective products must be in new resalable condition.

Refund:

  • Returns up to 30 days from the date of purchase will be eligible for a 100% refund or store credit.
  • Returns 31 - 90 days from the date of purchase will be subject to a 20% restocking fee.
  • Returns over 90 days will be at the discretion of Berube’s Truck Accessories and be subject to a  25% or more restocking fee.
  • Shipping will not be refunded for returned products (unless shipped defective or incorrectly by fault of Berube’s Truck Accessories).
  • Receipt is required for refund.
  • Refunds will be in same payment form as purchase (i.e. refunded to credit/debit card used for purchase, if the original card is not available a store credit will be issued, cash for cash, if the purchase was made by check a refund will be issued after 14 days from the date of purchase). Returns without a receipt will only receive a store credit and may be subject to a restocking fee. Return policy is subject to change.


Special Orders:
Cancelation of special orders may be subject to loss of deposit. Returns of special orders are not accepted unless product is defective.